Product details
08F(1008) is a grade of boiling steel in stamping steel plates, F refers to boiling steel, 08 refers to the carbon content of eight parts per million.08F characteristics: low strength and hardness, plasticity, toughness, easy to deep drawing, drawing, bending and welding.
10F(1010) steel is a high-quality carbon steel, plastic, stamping and other cold processing and welding performance is good.
Product information:
08F Chemical composition(%): (C)0.05-0.11, (Cr)≤0.10,(Mn)0.25-0.50,(Ni)≤0.30,(Si)≤0.03,(P)≤0.035,(S)≤0.035,(Cu)≤0.20
Mechanical properties:
Section shrinkage ratio ψ (%):≥60
Hardness: No heat treatment, ≤131HB
In 08F, F means boiling steel, and 08 means that the carbon content is eight parts per 10,000
08F steel has good plasticity and is mainly used to manufacture cold stamping parts. Manganese plays a role in increasing elastic strength in steel, so the content can be deviated under the condition that the requirements are met.
---------------------------------------------------------------------------------------------------------------------------
10F Chemical composition(%): (C):0.07-0.13,(Mn):0.25-0.50, (Cr):≤0.15, (Ni):≤0.30, (Si):≤0.07, (Cu):≤0.25.
Mechanical property:
Section shrinkage ratio ψ (%):≥55;
Hardness: no heat treatment, ≤137HB;
Tensile strength σb (MPa):≥315(32);
Yield strength σs (MPa):≥185(19);
Elongation δ5 (%):≥33.
10F steel is high quality carbon steel. This steel strength is not large, and the difference state plasticity and toughness is very high, has good stamping, tensile and bending properties, good weldability, can be used for plastic parts: gaskets, strength requirements are not high carburizing and cyanide parts; Sleeve, short shaft, clutch disc.
The company mainly produces hot rolled steel plate, cold rolled steel plate, carbon steel coil, carbon steel pipe, API pipe, structural steel, steel bar and other products. The company has obtained ISO9001 quality system certification and European CE certification, and provides MTC quality certification according to EN10204.3.1
Companies adhering to the "integrity, quality, win-win" spirit of enterprise, in the years of pioneering and enterprising, never forget the original aspiration, accumulated strength, with wisdom and sweat to lead the development of iron and steel industry.
The annual production capacity of cold rolled steel plate production line is 600,000 tons, and the production specification is 0.12-1.2mm*750-1250mm. The production line adopts advanced full hydraulic on the road, flexible and stable control, combined with thickness gauge to achieve automatic control of AGC plate thickness, so as to ensure product quality.
TEST ITEMS
Inquiry